NSF ExFAB BioFoundry Wiki

User Tools

Site Tools

Trace:
ucsb_beckman_echo

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
ucsb_beckman_echo [2026/06/23 02:35] – alexandraucsb_beckman_echo [2026/06/23 02:36] (current) – alexandra
Line 13: Line 13:
   * Wipe off and decontaminate equipment surfaces and source/destination plates with 70% ethanol before and after use. **Do not use bleach.**   * Wipe off and decontaminate equipment surfaces and source/destination plates with 70% ethanol before and after use. **Do not use bleach.**
   * Ensure source plates are filled to the recommended minimum volume to allow acoustic ejection (typically ≥ 6 µL per well for 384-well LDV plates).   * Ensure source plates are filled to the recommended minimum volume to allow acoustic ejection (typically ≥ 6 µL per well for 384-well LDV plates).
-  * Inspect source plates for bubbles or particulates before loading — these can interfere with droplet ejection.+  * Inspect source plates for bubbles or particulates before loading as these can interfere with droplet ejection.
  
 ---- ----
ucsb_beckman_echo.txt · Last modified: by alexandra